When cleaning the air conditioner, it is necessary to first remove the wet curtain and unscrew the three screws on the upper part of the wet curtain; Holding the upper blind of the wet curtain in your hand, gently pull it outward and then lift it slightly upwards to remove it;

Then remove the cover of the air cooler and the water distribution pipe assembly. First, unscrew the screws inside the cover, and then lift the cover up to get it; Loosen the hose clamp in the water supply pipeline and loosen the water supply pipeline. Lift up the total length of the water distribution pipe and take it.

Next is the cleaning of the hardware and electrical components of the cold air fan car chassis, which are all methodical. For example, a soft cloth or brush can be used to clean the car chassis; Clean the fan blades with a soft cloth, and remember not to let dust from the fan blades fall into the air duct. Cleaning the water level sensor can use a small damp cloth to remove any dirt from the water level line;

Cleaning the water pump: You can use a brush to clean and tidy the dirt in the water pump and filter screen; Clean the laundry drain valve and pay attention to the stains on the bottom of the drain valve. After cleaning all components, there are also wet curtains and filters for cleaning.

Clean the wet curtain of the air conditioner from the inside out with warm water, and the filter can be removed and cleaned once a week; Twist off the back cover of the filtering device, clean the dirt in the filter element, and then install the back cover; After cleaning, follow the disassembly process in reverse order and reinstall the entire equipment to restore its original function.