When cleaning the air cooler, it is necessary to first remove the wet curtain and unscrew the three screws on the upper part of the wet curtain; Holding the upper blinds of the wet curtain, gently pull it outwards and then slightly lift it upwards to remove it;
Then remove the cover of the air cooler and the water distribution pipe assembly. First, unscrew the screws inside the cover, and then lift the cover up to get it; Loosen the clamp in the water supply pipeline and loosen the water supply pipeline. Lift up the total length of the water supply pipe and take it.
Next is the cleaning of the hardware and electrical components of the air cooler car chassis, which all require methods. For example, a soft cloth or brush can be used to clean the car chassis; Clean the fan blades with a soft cloth, and remember not to let dust from the fan blades fall into the air duct. Cleaning the water level sensor can be done by using a small damp cloth to remove any dirt or debris from the water level line;
Cleaning the water pump: You can use a brush to clean the dirt in the water pump and filter screen neatly; Clean the laundry drain valve and pay attention to the stains at the bottom of the drain valve. After cleaning all the components, there are also wet curtains and filters for cleaning.
Clean the wet curtain of the air cooler from the inside out with warm water, and the filter can be removed and cleaned once a week; Twist off the back cover of the filtering device, clean the dirt in the filter element, and then install the back cover; After cleaning, follow the disassembly process in reverse order and reinstall the entire equipment to restore its original function.
