Yuyao Jiayun Refrigeration Equipment Factory is committed to the expansion of energy conservation and environmental protection, and strictly adheres to the requirements of quality first, innovation and quality, and in strict requirements of raw material procurement, product development, manufacturing, construction and after-sales service. Achieve stability and improvement of product quality.
The principle of cooling of the air cooler (evaporative air conditioner) is:
The operation of the air cooler motor causes the external fresh air to enter the cavity to generate a negative pressure. The air flows through the porous wet curtain surface, forcing the dry bulb temperature of the curtain air to drop to a temperature close to the wet bulb temperature of the outside air. The ball temperature is 5-10 °C lower than the outdoor dry bulb temperature (up to 10 °C in dry heat). The hotter the air is, the larger the temperature difference is, the better the cooling effect is.
Introducing indoors from the outside, (this is called positive pressure system), so it can keep the indoor air fresh. At the same time, because the machine uses the principle of evaporation and cooling, it has the dual functions of cooling and humidifying. It can be used in textile, knitting and other workshops. Improve the temperature and humidification conditions, but also purify the air, reduce the needle breakage rate during the needle spinning process, and improve the quality of the needle textile products.
Some products should pay attention to the increase of humidity when using. If electronic, hardware, etc., then the negative pressure exhaust system can be combined to discharge the heat and humidity in the air to keep the indoor humidity relatively balanced. Meet the production process requirements.

FRP fan blade: Features:
1. The fan blade is made of plastic steel with high strength, high toughness and light weight.
2. At the same power, the air volume is the same as that of the aviation aluminum alloy fan blade.
3, the noise is small, because the plastic steel in the operation process and the air resonance is smaller than the aviation aluminum alloy.
4, heat, corrosion, acid resistance.
5, suitable for production workshops, Internet cafes, offices and other places where the noise requirements are relatively high.
FRP fan blade introduction:
Plastic steel composition: non-full leaf resin, glass fiber, reinforcing agent.
Features: High strength.
Low noise: Resonance with air is small, so the noise is relatively small compared to stainless steel and aluminum alloy blades, but the air volume does not change.
Weatherability: It is applied to outdoor weather test, such as light, heat, wind and rain, bacteria and other comprehensive damage. Its tolerance is called weather resistance.
Weather resistance: Because the production formula of plastic profiles is supplemented with UV absorbers with low temperature impact modifiers to improve weather resistance; it can be used for a long time in environments with drastic changes in temperature, without aging and quality; no embrittlement or discoloration.
Corrosion resistance: plastic steel fan leaves are resistant to acid, alkali and other chemical components. It has characteristics such as stainless steel and mildew resistance. It is especially suitable for use in industrial areas with high maritime climate, high temperature and high acid and alkaline impurities. It is incomparable with stainless steel and aluminum alloy blades.

Industrial chillers, chillers are now slowly increasing their position and possession in industrial production. In use, we usually have less to know whether these equipments need regular maintenance. In the meantime, customers have mentioned that we need to do an industry. The chiller and the maintenance plan of the chiller, because the industrial chiller only needs the correct maintenance method, the use time is longer and longer, and the effect of ventilation cooling is also very good, so the small fan of An Yida Refrigeration introduces some cold winds for everyone. The best maintenance method for machine and environmental protection air conditioners.
1. If the air pollution around the industrial cooling fan unit is large, the main unit should be cleaned once or twice a day to ensure that the cold air sent out is cool and clean. It is recommended to use the automatic function mode.
2. After the unit is operated for half a year, the bottom basin and the evaporation medium should be cleaned once, and the water pressure should not be too high during cleaning to avoid damaging the wet curtain.
3. When stopping for a long time, in order to prevent freezing damage to the body and mosquito breeding, the water inlet valve of the water machine should be closed, and then the unit should enter the cleaning mode, and drain the remaining water in the bottom tank of the water tank. Cover the dust-proof net and lock it to prevent the sandstorm from clogging the evaporation medium in the early autumn and winter.
4. When repairing the air cooler unit, the power supply of the control box must be turned off. When the maintenance personnel are in the machine, it is necessary to hang the maintenance card and the power supply is strictly prohibited.
5. When the unit of the air cooler is tripped due to a fault, it is necessary to first remove the fault and then press the air switch.
6. For the first time, there is a sawdust smell, which disappears after 24 hours of continuous use.
7. The rain-proof blinds can't be stressed. It is strictly forbidden to use the blinds as the point of force to move when installing or in this case.
8, memory battery should pay attention to replacement after two years.
9. The mainframe frame should be treated with anti-corrosion rust after two years. It is best to paint it. Every year, it is necessary to check the solidity of the main frame regularly.
    Traditional industrial chillers have high energy consumption and high operating costs, which constrains purchases at a certain level. Evaporative cooling fan, energy-saving, environmental protection, ventilation and other characteristics, for the electronics, textiles, shoes, plastics, machinery workshops, cigarette factories, modern homes, units, supermarkets, entertainment venues, waiting rooms and other environmental ventilation cooling supply Excellent solution.