In the modern industrial production process, more and more attention is paid to improving the workshop environment. Especially in the hot summer months, it is essential to cool some of the posts that are suffering from high temperatures. Mobile air-conditioners can help improve the workshop environment and cool down the job: a comfortable job can increase the enthusiasm of workers and increase the efficiency of the factory.
There are many cooling schemes, such as installing central air conditioners, spray cooling, water curtain air conditioners, etc., but these workshop cooling schemes often have their own drawbacks, and are not suitable for all walks of life: such as fan cooling noise is too large, long-term use It will make people feel dizzy; the use of evaporative cooling fans requires both electricity and water. Some industries do not have the requirements for high and low humidity. The initial investment in the overall air conditioning cooling is several million, and the later use and maintenance Maintenance costs are also high and scary, and the use of fewer people will cause waste.
 The mobile industrial air conditioner has the characteristics of strong refrigeration capacity, wide adaptability and high flexibility. It is the first choice for many workshop cooling schemes and is widely used for cooling various types of equipment.

The first step is to understand how the chiller is used. The chiller must be used in a well ventilated space. why? Everyone knows that the cooling fan is cooled by water evaporation. If it is used for a long time in a closed space, the wind blown out by the machine will have humidity. The air will circulate continuously in a confined space, and the water will not be saturated. After evaporating, it will no longer be cooled!
1: Place horizontally. The air-conditioning fan should be placed horizontally. Be careful not to tilt when using it. Check whether the power supply of the socket is consistent with the parameters on the nameplate of the fan before use.
2: Water is often added. After the new machine or the air conditioner fan that has been deactivated for a long time, it must be filled with clean water before use. The water level can be observed through the water mark to control the water supply. Before adding water, the power plug should be unplugged to prevent damage to the electrical components. If you rise to near the "highest" position, don't overfill it; after filling the water, close the door. When using it for refrigeration, pay attention to the condition of the water mark. When the water level drops to the "lowest" position, it should Add water, or you will lose the cooling effect.
3: Frozen ice crystals. The general air-conditioning fans are equipped with two ice crystals. Every night, one of them is kept in the refrigerator cabinet of the home for a period of time. The next day, it is taken out and put into the water tank for better effect.
4: Appropriate humidification. In order to use the humidifying and humidifying air supply, the water tank must first be filled with clean water. After about 1-3 minutes of starting work, the outlet air temperature is lowered by the ambient temperature to achieve the best effect. When there are conditions, add low-temperature cold water or ice water, and the cooling effect is better. If you add the right amount of spices in the water, it will be a burst of fragrant and cool zephyr. In the hot summer, you will feel refreshed and comfortable. Press the cooling and humidifying light, the indicator light is on, and the humidifying function is activated. For example, if the humidifying function is cancelled and then the button is pressed, the indicator light is off and the humidifying function is stopped.
5: Swinging air supply. The general air-conditioning fan has the function of swinging the air to the left and right. When the wind is required to be oscillated, it is only necessary to press the "wind direction" selection button once, so that the "swinging wind" indicator light is on, that is, the air is automatically supplied right and left, and the air supply angle is 120 degrees. If there is no need to swing the air supply, press the wind direction selection button once to make the “directional wind” indicator light, then stop the swing and direct the air supply. At the same time, the upper and lower air supply positions can be adjusted. For example, the direction of the long air guide piece can be adjusted by hand, so that the air supply direction can be all downward or upward, and adjusted to the optimal position according to your needs.
Maintenance: The air conditioner fan should not be used for a long time. The water in the water tank should be cleaned up and aired at normal temperature for a period of time, so that the filter part of the machine, especially the filter part, is completely dry and then put on the plastic bag for reuse.

Traditional air conditioners have high energy consumption and high operating costs, which limits purchases to a certain extent. Our company's evaporative cooling fan reflects the characteristics of energy saving, humanity, beauty and environmental protection. It is for electronics, textiles, shoes, plastics, machinery workshops, cigarette factories, modern homes, offices, supermarkets, hospitals, casinos, and waiting cars. Ventilation cooling in environments such as the room provides the perfect solution.
Advantages of evaporative coolers compared to central air conditioners:
1. The evaporative cooling fan uses water to evaporate and cool. The air supply distance is long and the air volume is large, which can make the closed temperature distribution uniform and have a filtering function. The indoor environment is comfortable, the oxygen content is high, and the air is fresh. The traditional central air conditioner directly uses Freon refrigeration, the air supply temperature difference is large, the air volume is small, and the room temperature is not easy to be uniform. The ventilation and ventilation function is poor, and it is not suitable for semi-enclosed places. If it is used for a long time, it is easy to get "air conditioning disease".
2. The service life of the evaporative cooling fan is twice as long as that of the traditional central air conditioner, the overall failure rate is low, and the equipment maintenance is simple and convenient.
Evaporative air conditioner has a small investment, and the overall operation efficiency is high, and the running cost is saved. Taking 2000 square meters of space as an example, 20 sets of evaporative air conditioner mainframes are used for one hour full load calculation, and the running power is 20KW. The central air-conditioning (180 horses) runs at an electric capacity of 180 kW per hour. It can save 48,000 yuan per month by operating for 10 hours per day. Energy saving up to 89%, introduction of evaporative cooling fan
Traditional air conditioners have high energy consumption and high operating costs, which limits purchases to a certain extent. Our company's evaporative cooling fan reflects the characteristics of energy saving, humanity, beauty and environmental protection. It is for electronics, textiles, shoes, plastics, machinery workshops, cigarette factories, modern homes, offices, supermarkets, hospitals, casinos, and waiting cars. Ventilation cooling in environments such as the room provides the perfect solution.